CFE> help
Available commands:

fe                  Erase a selected partition of the flash (use fi to display informations).
fi                  Display informations about the flash partitions.
nandinit            Re-init the NAND driver.
sm                  Set memory or registers.
dm                  Dump memory or registers.
ww                  Write the 2 partition, you must choose the 0 wfi tagged image.
w                   Write the whole image with wfi_tag on the previous partition if wfiReserved field in tag is set to default
e                   Erase NAND flash
r                   Run program from flash image or from host depend on [f/h] flag
p                   Print boot line and board parameter info
c                   Change booline parameters
i                   Erase persistent storage data
a                   Change board AFE ID
b                   Change board parameters
reset               Reset the board
help                Obtain help for CFE commands

For more information about a command, enter 'help command-name'
*** command status = 0
CFE> fi
0 : boot    offset=0x00000000, size=16384 (16 ko), block=1
1 : rootfs1 offset=0x00004000, size=16236544 (15 Mo), blocks=991
2 : rootfs2 offset=0x00f80000, size=16236544 (15 Mo), blocks=991
3 : data    offset=0x01f00000, size=33554432 (32 Mo), blocks=2048
4 : bbt     offset=0x03f00000, size=1048576 (1024 ko), blocks=64
flash_end   offset=0x04000000, blocks=4096

*** command status = 0
CFE> p
Board IP address                  : 192.168.1.1:ffffff00  
Host IP address                   : 192.168.1.100  
Gateway IP address                :   
Run from flash/host (f/h)         : f  
Default host run file name        : vmlinux  
Default host flash file name      : bcm963xx_fs_kernel  
Boot delay (0-9 seconds)          : 1  
Boot image (0=latest, 1=previous) : 0  
Board Id (0-13)                   : NB6V-FXC-r0  
Number of MAC Addresses (1-32)    : 10  
Base MAC Address                  : 24:95:04:01:fb:58  
PSI Size (1-64) KBytes            : 24  
Enable Backup PSI [0|1]           : 0  
System Log Size (0-256) KBytes    : 0  
Main Thread Number [0|1]          : 0  

*** command status = 0