source:

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @125   3 years pulkomandy Re-route ordon using SOIC 74LS chips - Board is smaller (42mm height) …
(edit) @124   3 years pulkomandy Added kicak footprints for the CH376
(edit) @123   3 years pulkomandy - Fix some invisible wires - Add FT-Prog file for 1.0 board (only …
(edit) @122   4 years pulkomandy Board version 1.0 - Add footprint for CH376 activity LED (not …
(edit) @121   4 years pulkomandy Fix SD card pinout.
(edit) @120   4 years pulkomandy Fixes after testing of prototype batch.
(edit) @119   5 years pulkomandy A lot of tweaking and small fixes.
(edit) @118   5 years pulkomandy Update following Gerald's coomments * Use 74LS38 instead of 74LS00 …
(edit) @117   5 years pulkomandy Complete routing of Albireo, including serial port.
(edit) @116   5 years pulkomandy Work in progress on Albireo interface * Complete routing for CH376 …
(edit) @115   6 years pulkomandy AmiPS2: add firmware
(edit) @114   6 years pulkomandy Drop hacked "shift" handling from libps2. * It's up to clients to do …
(edit) @113   6 years pulkomandy kbd: working XTK on ATtiny2313 * Move more stuff to common.mk and …
(edit) @112   6 years pulkomandy Move the ASCII keymap out of ps2_keyboard.c. It is used only by the …
(edit) @111   6 years pulkomandy Build things in an MCU subfolder to avoid misuse of .o files.
(edit) @110   6 years pulkomandy Chiptest: use libusart.
(edit) @109   6 years pulkomandy Make libusart aware of attiny2313.
(edit) @108   6 years pulkomandy Avoid calling the counter overflow handler multiple times.
(edit) @107   6 years pulkomandy Make baudrate computation aware of F_CPU.
(edit) @106   6 years pulkomandy Add readme for chiptest. The current state is rathere minimal, but at …
(edit) @105   6 years pulkomandy iMove muserial test to a more generic name.
(edit) @104   6 years pulkomandy Convert muserial test to common.mk.
(edit) @103   6 years pulkomandy Fix ps2toserial build. * Share relevant stuff in common.mk so I don't …
(edit) @102   6 years pulkomandy Update docs now that I have things working.
(edit) @101   6 years pulkomandy Make XTK work (sort of). * Switch to atmega48P. No need for an …
(edit) @100   6 years pulkomandy PS/2: support ATmega48P * A register got renamed.
(edit) @99   6 years pulkomandy Only toggle PD6.
(edit) @98   6 years pulkomandy Add blinkled hexfile for atmega48p.
(edit) @97   6 years pulkomandy Make it easier to use blinkdel with various AVRs.
(edit) @96   6 years pulkomandy Start modifying PCW code for XT.
(edit) @95   6 years pulkomandy Prepare directory for XTK
(edit) @94   6 years pulkomandy Move all the keyboard stuff to a subdirectory.
(edit) @93   6 years pulkomandy Move all the keyboard stuff to a subdirectory.
(edit) @92   6 years pulkomandy Add cpc compacflash interface.
(edit) @91   6 years pulkomandy Use a smarter strategy to avoid losing keystrokes.
(edit) @90   6 years pulkomandy Add clock switch. When used as an output, IOB0 can be set low to …
(edit) @89   6 years pulkomandy Add DK'Tronics AY interface for PCW. Also add Sparkfun library …
(edit) @88   6 years pulkomandy iFix some documentation errors for FlashGordon.
(edit) @87   7 years pulkomandy Add Frizzle.
(edit) @86   7 years pulkomandy Generate GERBER files for final version. Ready for manufacturing …
(edit) @85   8 years pulkomandy Handle call parameters to allow selecting the rom number and file.
(edit) @84   8 years pulkomandy User manual.
(edit) @83   8 years pulkomandy Fix remaining problems. Now successfully flashing stuff, but only to ROM 5!
(edit) @82   8 years pulkomandy PROGRESS! With the fixed hardware, things are going much better... …
(edit) @81   8 years pulkomandy swap write switch pins to match hardware... This version is confirmed …
(edit) @80   8 years pulkomandy WIP manager. Still not working.
(edit) @79   8 years pulkomandy Try to erase and write a ROM (since we can't read the ID because of …
(edit) @78   8 years pulkomandy Add WIP code for the manager (and ROM testing)
(edit) @77   8 years pulkomandy Oops ! Missing chip enable connection to the flash chip. This actually …
(edit) @76   8 years pulkomandy Last minor corrections + sent to manufacturer !
(edit) @75   8 years pulkomandy Fix DRC warnings
(edit) @74   8 years pulkomandy Routing done added reset button and ALL ROMS OFF mode (remove JP0)
(edit) @73   8 years pulkomandy routing in progress
(edit) @72   8 years pulkomandy GORDON Continue routing, Fix schematcis information
(edit) @71   8 years pulkomandy * Finished schematic (now a clearer version of the MegaFlash? one) * …
(edit) @70   8 years pulkomandy Replace broken GORDON schematics with reverse engineering of MegaFLASH …
(edit) @69   8 years pulkomandy Move PIC init earlier in boot sequence since we don't control VCC line …
(edit) @68   8 years pulkomandy Fix USB communication code. Now to debug the ICSP part…
(edit) @67   8 years pulkomandy * debug leds * fix read and write code (still not working !)
(edit) @66   8 years pulkomandy Progress on the host driver. Still untested.
(edit) @65   8 years pulkomandy WIP driver. Not much progress today.
(edit) @64   8 years pulkomandy Add first version of herePic, an AVR based PIc programmer using ICSP …
(edit) @63   8 years pulkomandy WIP PS/2 to Amstrad PCW keyboard adapter
(edit) @62   8 years pulkomandy * Final cleanup of new AmiPS2 board * Added GERBER files * (batch of …
(edit) @61   8 years pulkomandy Add some suport for reading 27c020 chips. Should be usable with most …
(edit) @60   8 years pulkomandy Still not working... Added very agressive timing, fixed some potential …
(edit) @59   8 years pulkomandy More work. * Power on/off sequence OK * Code to read chip ID …
(edit) @58   8 years pulkomandy Add EPRoxygen, driver for SEEIT EPR-02 parallel port EEPROM burner for …
(edit) @57   8 years pulkomandy WIP SCSI to SD device. Based on …
(edit) @56   8 years pulkomandy Add new routing (version 3) for amips2, using SMD parts. Less holes to …
(edit) @55   8 years pulkomandy Add motor ON pin scanning
(edit) @54   8 years pulkomandy Fix bugs related to minimal-size blocks. Loading a standard game works !
(edit) @53   8 years pulkomandy * Generate MSb first. * WORKING FILE HEADER SENT !
(edit) @52   8 years pulkomandy * Remove binary file for now * Make sure the output stays high when …
(edit) @51   8 years pulkomandy work in progress CrO2: * USB configuration for a control endpoint …
(edit) @50   8 years pulkomandy Clone starkadroid to create CrO2
(edit) @49   8 years pulkomandy Some fixes and improvements to akusb and lib amiga_keyboard to try not …
(edit) @48   9 years pulkomandy * Rename starkadroid circuit to V-USB Dev * Connect the remaining …
(edit) @47   9 years pulkomandy Move christmasblinker to firmware folder.
(edit) @46   9 years pulkomandy Remove previous starkadroid folder (now in generic v-usb dev)
(edit) @45   9 years pulkomandy Copy Starkadroid firmware.
(edit) @44   9 years pulkomandy
(edit) @43   9 years pulkomandy Lots of fixes to Gordon after tests on the first prototype.
(edit) @42   9 years pulkomandy * Fix schematic for µSerial : add "local handshake" to make some PCs …
(edit) @41   9 years pulkomandy fix wire-or (backward diodes) and improve routing. 15 straps left…
(edit) @40   9 years pulkomandy Add cmp file for ramcard Finished GORDON card first routing. Still …
(edit) @39   9 years pulkomandy Create Gordon card.
(edit) @38   9 years pulkomandy Routing finished. Schematic is now 100% identical to the original.
(edit) @37   9 years pulkomandy Début de reproduction du routage. Quelques ajouts et corrections dans …
(edit) @36   9 years pulkomandy * Blinkdel for attiny2313 (and easier to adapt) * Ramcard schematic update
(edit) @35   10 years pulkomandy Final working version.
(edit) @34   10 years pulkomandy * Linux only supports 32 buttons in a joystick descriptor. So only …
(edit) @33   10 years pulkomandy * Code qui compile * Corrections sur le CI.
(edit) @32   10 years pulkomandy Serial port test for microserial.
(edit) @31   10 years pulkomandy * Report everything as buttons. * Don't periodically send reports. …
(edit) @30   10 years pulkomandy Copy of blinkled as a baseproject for attiny2313 tests for microserial.
(edit) @29   10 years pulkomandy Add some init code.
(edit) @28   10 years pulkomandy Some optimizations to get faster interrupts Some comments in main to …
(edit) @27   10 years pulkomandy Now it is possible to assemble the code (with AVRA)
(edit) @26   10 years pulkomandy Add a circuit folder for kicad stuff Initial (very early) version of …
Note: See TracRevisionLog for help on using the revision log.