The Genius PC is a home computer from VTech. Released in the late 90s, it is one of the last microcomputers. Not very much about it is known, the computer doesn't come with any useful hardware documentation and the integration of everything in a big ASIC makes it hard to know how it works.

Moreover, this computer have different names in each country, making it even harder to track down the information.

• France : VTech Genius PC
• Germany : VTech Genius IQ 128 and VTech TV 512
• UK : VTech IT Unlimited
• USA : VTech Precomputer Unlimited
• Also mentioned on the french packaging : Switzerland, the Netherlands, Canada.

Hardware :

• Motorola MC68EC000, 16-bit external databus, 32MHz
• 256K of RAM
• 2M of ROM - Sharp LH537NWN mask ROM
• Mass storage : 128KB flash memory - AM29F010
• Cartridge port, apparently on memory bus with system ROM and storage flash. The french system comes with cartridges only containing straps, likely shorting some pins enable extra features...

The ROM is a 16-bit one, available directly on the CPU bus. The FLASH is 8-bit, but directly on the CPU bus as well. The cartridge port is connected to the same bus, and can be used for extra flash storage.

Both flash chips (internal and german storage extension cartridge) are 8-bit only. This means they can't be used for executable code. However, the cartridge port itself is 16bit and can be used for that purpose.

The RAM is accessed through the VTech 27-05793 chip, which likely handles memory refresh. I don't know if the RAM is mapped as 16 or 8-bit to the CPU, and if there are any wait states when accessing it or whatever. The VTech chip might also have some internal memory ?

Other chips

• BH7236AF : Video encoder (PAL/NTSC + RGB output). On french motherboard RGB is used, composite is not wired.
• LMT324 : LM324, used as audio amplifier
• C807U : Toshiba microcontroller. Handles mouse and keyboard scanning, LEDs, on/off buttons, etc. Running at low speed out of internal RC oscillator, as there is no external crystal for it. Seems to communicate with the VTech chip through a serial link.
• VTech 27-05793 : of course a datasheet of this one would make things easier. Seems to be also called "LS05PR730C102" ?

Output : RGB color video (french version, others have composite output) and mono sound.

Color palette is at least 15 colors :

• White
• Light grey
• Dark grey
• Black
• Sky blue
• Blue
• Red
• Green
• Dark green
• Yellow
• Orange
• Brown
• Dark brown
• Mauve
• Pink

According to the MESS driver, the 16th color is transparent when used for the hardware cursor. The display resolution is 512x256. That's a 64K frame buffer. Top and bottom borders can have different colors.

Serial port

Turns out the serial port is standard. 9600 baud, 8N1, no control flow. You can connect with minicom and use the "chat" application. Files are transferred using the XModem protocol.

This means text is encoded in ASCII. Makes it easy to look for them in the ROM dump.

Cartridge port

Finally the cartridge port is understood!

To run code from there, you need the cartridge ROM (a 16 bit one) to start with "IQP QA TESTING PROG\0" or "IQ CART NOTV FRE 01\0" or "IQ CARTRIDGE FRE 01\0". The first string looks generic, but the two others (with FRE in the name) are likely specific to the French version, the other versions of the internal ROM should be checked to see what they expect.

The NOTV variant seems to not output anything to the TV (possibly it is run before the video out is up and running). According to the MESS driver, there are several VTech machines whch share a similar architecture, and some of them are laptop-like with an LCD display, so that may explain it.

The ROM jumps straight into the cartridge (at offset 0x14, just after the identifier string) if it detects a cartridge.

Pinout

N.	TOP	BOTTOM	N.
1	CARD1	GND	2
3	D3	D11	4
5	D10	D4	6
7	D2	D12	8
9	D9	D5	10
11	D1	D13	12
13	D8	D6	14
15	D0	D14	16
17	GND	D7	18
19	+5V	D15	20
21	+5V	A0	22
23	A1	A16	24
25	A2	A15	26
27	A3	A14	28
29	A4	A13	30
31	A5	A12	32
33	A6	A11	34
35	A7	A10	36
37	A17	A9	38
39	A18	A8	40
41	/OE	A19	42
43	RESET	/WE	44
45	/LDS	?	46
47	?	A8	/CE
49	CARD2	UDS	50

CARD1 = GND to detect fake-cart 1. CARD2 = GND to detect fake-cart 2. Both to GND to detect a real ROM cart.

Rom DUMP

With the help of an AT90USBkey a dump of the ROM was made. You can download it in the attachment section below. The rom is 2MB big, but there is a big chunk of it which is actually text, graphics and audio sample, and disassembling the remaining 68000 code should not be too hard.

For now I only have the French ROM, but people are going to send me the German and UK ROM chips so I can dump them as well (thanks guys !). If you have other info about the hardware, let us know !

MESS core

I have started a MESS driver for this machine. Other people took a look at it and it's now booting, and allows you to use the machine : video, keyboard and mouse are working, as well as the flash memory chip. There is still no sound, and, as far as I can tell, no serial port emulated.

Memory map

• $300000 Video RAM
• $600301 Keyboard control (LEDs and stuff)
• $600801 4 for power on, 0 for power off