This chapter documents the Backend for the PowerPC processor family.

@section Additional options for this version

This backend provides the following additional options:

@table @option

    @item -amiga-align

                Do not require any alignments greater than 2 bytes.
                This is needed when accessing Amiga system-structures, but
                can cause a performance penalty.

    @item -baserel32mos

                Use 32bit base-relative addressing as used by MorphOS.

    @item -baserel32os4

                Use 32bit base-relative addressing as used by AmigaOS 4.

    @item -const-in-data

                By default constant data will be placed in the @code{.rodata}
                section. Using this option it will be placed in the 
                @code{.data} section.
                Note that on operating systems with memory protection this
                option will disable write-protection of constant data.

    @item -eabi
               Use the PowerPC Embedded ABI (eabi).

    @item -elf

                Do not prefix symbols with '_'. Prefix labels with '.'.

    @item -fsub-zero

                Use fsub to load a floating-point-register with zero.
                This is faster but requires all registers to always contain
                valid values (i.e. no NaNs etc.) which may not be the case
                depending on startup-code, libraries etc.

    @item -gas
                Create code suitable for the GNU assembler.

    @item -madd
               Use the @code{fmadd/fmsub} instructions for combining
                multiplication with addition/subtraction in one instruction.
                As these instructions do not round between the operations,
                they have increased precision over separate addition and
                multiplication.

                While this usually does no harm, it is not ISO conforming
                and therefore not the default behaviour.

    @item -merge-constants

                Place identical floating point constants at the same
                memory location. This can reduce program size.

    @item -no-align-args

                Do not align function arguments on the stack stricter
                than 4 bytes. Default with @option{-poweropen}.

    @item -no-peephole

                Do not perform several peephole optimizations.
                Currently includes:
                @itemize @minus
                 @item better use of d16(r) addressing
                 @item use of indexed addressing modes
                 @item use of update-flag
                 @item use of record-flag
                 @item use of condition-code-registers to avoid certain branches
                @end itemize

    @item -no-regnames

                Do not use register names but only numbers in the assembly
                output. This is necessary
                to avoid name-conflicts when using @option{-elf}.

    @item -poweropen

                Generate code for the PowerOpen ABI like used in AIX.
                This does not work correctly yet.

    @item -sc

                Generate code for the modified PowerOpen ABI used in the
                StormC compiler (aka WarpOS ABI).

    @item -sd
                 Place all objects in small data-sections.

    @item -setccs

                The V.4 ABI requires signalling (in a bit of the condition code
                register) when arguments to varargs-functions
                are passed in floating-point registers.
                vbcc usually does not make use of this and
                therefore does not set that bit by default.
                This may lead to problems when linking objects compiled by
                vbcc to objects/libraries created by other
                compilers and calling varargs-functions with floating-point
                arguments.
                @option{-setccs} will fix this problem.

    @item -use-commons

                Use real common symbols instead of bss symbols for
                non-initialized external variables.

    @item -use-lmw

                Use @code{lmw/stmw}-instructions. This can significantly reduce
                code-size. However these instructions may be slower on
                certain PPCs.

@end table

@section ABI

        This backend supports the following registers:

        @itemize @minus
        @item @code{r0} through @code{r31} for the general purpose registers,
        @item @code{f0} through @code{f31} for the floating point registers and
        @item @code{cr0} through @code{cr7} for the condition-code registers.
        @end itemize

        Additionally, the register pairs @code{r3/r4, r5/r6, r7/r8, r9/r10,
        r14/r15, r16/r17, r18/r19,
        r20/r21, r22/r23, r24/r25, r26/r27, r28/r29} and @code{r30/r31} are
        available.

        @code{r0, r11, r12, f0, f12} and @code{f13} are reserved by the
        backend.

        
    The current version generates assembly output for use with @file{vasmppc}
    or the GNU assembler. The generated code should
    work on 32bit systems based on a PowerPC CPU using the V.4 ABI or the
    PowerPC Embedded ABI (eabi).


    The registers r0, r3-r12, f0-f13 and cr0-cr1 are used as scratch registers
    (i.e. they can be destroyed in function calls), all other registers are
    preserved. r1 is the stack-pointer and r13 is the small-data-pointer if
    small-data-mode is used.

    The first 8 function arguments which have integer or pointer types
    are passed in registers r3 through r10 and the first 8 floating-point
    arguments are passed in registers f1 through f8. All other arguments
    are passed on the stack.

    Integers and pointers are returned in r3 (and r4 for long long),
    floats and doubles in f1.
    All other types are returned by passing the function the address
    of the result as a hidden argument - so when you call such a function
    without a proper declaration in scope you can expect a crash.

    The elementary data types are represented like:

    @example
    type        size in bits        alignment in bytes (-amiga-align)

    char                8                       1 (1)
    short              16                       2 (2)
    int                32                       4 (2)
    long               32                       4 (2)
    long long          64                       8 (2)
    all pointers       32                       4 (2)
    float              32                       4 (2)
    double             64                       8 (2)
    @end example

@section Target-specific variable-attributes

    The PPC-backend offers the following variable-attributes:

@table @code

    @item __saveds
                    Load the pointer to the small data segment at
                 function-entry. Applicable only to functions.

    @item __chip
                      Place variable in chip-memory. Only applicable on
                 AmigaOS to variables with static storage-duration.

    @item __far
                       Do not place this variable in the small-data segment
                 in small-data-mode. No effect in large-data-mode.
                 Only applicable to variables with static storage-
                 duration.

    @item __near
              Currently ignored.

    @item __saveall
                Make sure all registers are saved by this function. On lower
                optimization levels, all volatile registers will be saved
                additionally. On higher levels, only the ones that may be
                destroyed, are saved.

    @item __interrupt
                Return with en @code{rfi}-instruction rather than @code{blr}.

    @item __section("name","attr")
                 Place this function/object in section "name" with
                 attributes "attr".
@end table


@section Target-specific pragmas

    The PPC-backend offers the following #pragmas:

@table @code

    @item #pragma amiga-align
             Set alignment like -amiga-alignment option.

    @item #pragma natural-align
           Align every type to its own size.

    @item #pragma default-align
           Set alignment according to command-line options.

@end table

@section Predefined Macros

        This backend defines the following macros:

@table @code
        @item __PPC__
        
        @item __AMIGADATE__
                This is set to current date as @code{"(DD.MM.YYYY)"},
                useful with version strings.
@end table

@section Stack

    If the @option{-stack-check} option is used, every function-prologue will
    call the function @code{__stack_check} with the stacksize needed by this
    function in register r12. This function has to consider its own
    stacksize and must restore all registers.

@section Stdarg

    A possible <stdarg.h> for V.4 ABI could look like this:

@example

typedef struct @{
  int gpr;
  int fpr;
  char *regbase;
  char *membase;
@} va_list;

char *__va_start(void);
char *__va_regbase(void);
int __va_fixedgpr(void);
int __va_fixedfpr(void);

#define va_start(vl,dummy) \
  ( \
    vl.gpr=__va_fixedgpr(), \
    vl.fpr=__va_fixedfpr(), \
    vl.regbase=__va_regbase(), \
    vl.membase=__va_start() \
  )

#define va_end(vl) ((vl).regbase=(vl).membase=0)

#define va_copy(new,old) ((new)=(old))

#define __va_align(type) (__alignof(type)>=4?__alignof(type):4)

#define __va_do_align(vl,type) ((vl).membase=(char *)((((unsigned int)((vl).membase))+__va_align(type)-1)/__va_align(type)*__va_align(type)))

#define __va_mem(vl,type) (__va_do_align((vl),type),(vl).membase+=sizeof(type),((type*)((vl).membase))[-1])

#define va_arg(vl,type) \
 ( \
  (__typeof(type)&127)>10? \
    __va_mem((vl),type) \
  : \
   ( \
    (((__typeof(type)&127)>=6&&(__typeof(type)&127)<=8)) ? \
     ( \
      ++(vl).fpr<=8 ? \
        ((type*)((vl).regbase+32))[(vl).fpr-1] \
      : \
        __va_mem((vl),type) \
     ) \
    : \
     ( \
      ++(vl).gpr<=8 ? \
        ((type*)((vl).regbase+0))[(vl).gpr-1] \
      : \
        __va_mem((vl),type) \
     ) \
   ) \
 )

@end example

    A possible <stdarg.h> for PowerOpen ABI could look like this:

@example

typedef unsigned char *va_list;

#define __va_align(type) (4)

#define __va_do_align(vl,type) ((vl)=(char *)((((unsigned int)(vl))+__va_align(type)-1)/__va_align(type)*__va_align(type)))

#define __va_mem(vl,type) (__va_do_align((vl),type),(vl)+=sizeof(type),((type*)(vl))[-1])

#define va_start(ap, lastarg) ((ap)=(va_list)(&lastarg+1))
 
#define va_arg(vl,type) __va_mem(vl,type)
 
#define va_end(vl) ((vl)=0)

#define va_copy(new,old) ((new)=(old))

@end example


@section Known problems

@itemize @minus
  @item  composite types are put on the stack rather than passed via pointer
  @item indication of fp-register-args with bit 6 of cr is not done well
@end itemize